Property from the Laurence and Patrick Seguin Collection Jean Prouvé Important 'Cité' armchair, from Jean Prouvé's private collection circa 1930 Painted steel, leather, fabric. 83.5 x 67 x 95.2 cm (32 7/8 x 26 3/8 x 37 1/2 in.) Manufactured by Les Ateliers Jean Prouvé Nancy, France.
Provenance Jean Prouvé France Thence by descent Acquired from the above by the present owners Exhibited 'Jean Prouvé: Architecture', Gagosian Gallery, Paris, 20 October-23 December 2010 'A Passion for Jean Prouvé From Furniture to Architecture: The Laurence and Patrick Seguin Collection', Pinacoteca Giovanni and Maria Agnelli, 6 April-8 September 2013 Literature Two Master Metalworkers: Jean Prouvé Serge Mouille exh. cat., Antony DeLorenzo, New York, Alan and Christine Counord, Paris, 1985, p. 41 'Jean Prouvé, sedie tra il 1924 e il 1930', Domus, no. 397, September 1988, p. 87 Galeries Jousse Seguin and Galerie Enrico Navarra, Jean Prouvé Paris, 1998, pp. 130, 132-33, 179, 223 Peter Sulzer Jean Prouvé Œuvre complète / Complete Works, Volume 1: 1917-1933, Basel, 2000, pp. 206-11 for images, drawings and a technical drawing 'The least known modern master', Domus, no. 845, February 2002, pp. 91, 96-97 Pinacoteca Giovanni e Marella Agnelli and Galerie Patrick Seguin, A Passion for Jean Prouvé From Furniture to Architecture: The Laurence and Patrick Seguin Collection, exh. cat., Paris, 2013, illustrated pp. 126-27 Galerie Patrick Seguin, Jean Prouvé Volume 1, Paris, 2017, illustrated pp. 110-11 Galerie Patrick Seguin, Jean Prouvé Volume 2, Paris, 2017, illustrated p. 253 Catalogue Essay Cité & Visiteur chairs by Jean Prouvé The 1930s were a pivotal moment for Jean Prouvé a time in which he changed workshops from Rue de Custine to Rue des Jardiniers and set up the iconic Les Ateliers de Jean Prouvé with engineer and brothe-rin-law André Schott. The Cité armchair (Lot 224) is a product of this period, designed for a competition to furnish student dorm rooms at the Cité Universitaire in Nancy, France, where he would later become mayor. It was the smallest series model to come out of Les Ateliers. Alongside its comfortability, which was its main marketing feature, it was also light and hygienic and was sold to sanatoriums as well as universities. The new trend for ‘easy’ chairs to replace the older ‘reading’ chairs saw a pressed-steel structure with open U-shaped legs linked by crosspieces. This was then attached to a tubing frame bearing generous dimensions of a stretched fabric seat, with screws for amendment of the fabric’s tension. The armrests were made of broad leather pieces that were attached to the frame with metal tabs. Of this model, 60 variations were made, each with slight amendments to the armrests and spring-load adjustability of the chair. Its rational and sculptural aesthetic would pave the way for many of Jean Prouvé’s home furniture designs and indeed, the designer himself kept one in his own living room. The model seen here today comes from the designer’s private collection so it would not be imprudent to suggest that this was that very chair. Despite their popularity, large scale production of such relaxation models only began after World War II, such as that of the Visiteur armchair (lot 226), a progression of the present lot design Cité armchair. The former was created with the intention of a chaise lounge for the Solvey Hospital, however its aesthetic design made it popular for home use as well. Partly due to the scarcity of steel but also as a departure from metal furniture made during the war, Prouvé began to construct pieces that were made of wood such as the Visiteur. The model has many renditions, each one an improvement of its predecessor, in terms of lightness, stability, toughness and adjustability. The model seen here, the FV-12 is no exception. Indicative of one of the later models, the slats of the seat and back of the FV-11 have been replaced by plywood sheets, which have been slotted into grooves into the wooden side members and reinforced with metal profiles. The legs have been stiffened with transversal tubes mounted with rubber washers and round head screws, while the top of the backrest is fitted with a drawn wire crosspiece. The ability to meld both design and functionality as seen i
Property from the Laurence and Patrick Seguin Collection Jean Prouvé Important 'Cité' armchair, from Jean Prouvé's private collection circa 1930 Painted steel, leather, fabric. 83.5 x 67 x 95.2 cm (32 7/8 x 26 3/8 x 37 1/2 in.) Manufactured by Les Ateliers Jean Prouvé Nancy, France.
Provenance Jean Prouvé France Thence by descent Acquired from the above by the present owners Exhibited 'Jean Prouvé: Architecture', Gagosian Gallery, Paris, 20 October-23 December 2010 'A Passion for Jean Prouvé From Furniture to Architecture: The Laurence and Patrick Seguin Collection', Pinacoteca Giovanni and Maria Agnelli, 6 April-8 September 2013 Literature Two Master Metalworkers: Jean Prouvé Serge Mouille exh. cat., Antony DeLorenzo, New York, Alan and Christine Counord, Paris, 1985, p. 41 'Jean Prouvé, sedie tra il 1924 e il 1930', Domus, no. 397, September 1988, p. 87 Galeries Jousse Seguin and Galerie Enrico Navarra, Jean Prouvé Paris, 1998, pp. 130, 132-33, 179, 223 Peter Sulzer Jean Prouvé Œuvre complète / Complete Works, Volume 1: 1917-1933, Basel, 2000, pp. 206-11 for images, drawings and a technical drawing 'The least known modern master', Domus, no. 845, February 2002, pp. 91, 96-97 Pinacoteca Giovanni e Marella Agnelli and Galerie Patrick Seguin, A Passion for Jean Prouvé From Furniture to Architecture: The Laurence and Patrick Seguin Collection, exh. cat., Paris, 2013, illustrated pp. 126-27 Galerie Patrick Seguin, Jean Prouvé Volume 1, Paris, 2017, illustrated pp. 110-11 Galerie Patrick Seguin, Jean Prouvé Volume 2, Paris, 2017, illustrated p. 253 Catalogue Essay Cité & Visiteur chairs by Jean Prouvé The 1930s were a pivotal moment for Jean Prouvé a time in which he changed workshops from Rue de Custine to Rue des Jardiniers and set up the iconic Les Ateliers de Jean Prouvé with engineer and brothe-rin-law André Schott. The Cité armchair (Lot 224) is a product of this period, designed for a competition to furnish student dorm rooms at the Cité Universitaire in Nancy, France, where he would later become mayor. It was the smallest series model to come out of Les Ateliers. Alongside its comfortability, which was its main marketing feature, it was also light and hygienic and was sold to sanatoriums as well as universities. The new trend for ‘easy’ chairs to replace the older ‘reading’ chairs saw a pressed-steel structure with open U-shaped legs linked by crosspieces. This was then attached to a tubing frame bearing generous dimensions of a stretched fabric seat, with screws for amendment of the fabric’s tension. The armrests were made of broad leather pieces that were attached to the frame with metal tabs. Of this model, 60 variations were made, each with slight amendments to the armrests and spring-load adjustability of the chair. Its rational and sculptural aesthetic would pave the way for many of Jean Prouvé’s home furniture designs and indeed, the designer himself kept one in his own living room. The model seen here today comes from the designer’s private collection so it would not be imprudent to suggest that this was that very chair. Despite their popularity, large scale production of such relaxation models only began after World War II, such as that of the Visiteur armchair (lot 226), a progression of the present lot design Cité armchair. The former was created with the intention of a chaise lounge for the Solvey Hospital, however its aesthetic design made it popular for home use as well. Partly due to the scarcity of steel but also as a departure from metal furniture made during the war, Prouvé began to construct pieces that were made of wood such as the Visiteur. The model has many renditions, each one an improvement of its predecessor, in terms of lightness, stability, toughness and adjustability. The model seen here, the FV-12 is no exception. Indicative of one of the later models, the slats of the seat and back of the FV-11 have been replaced by plywood sheets, which have been slotted into grooves into the wooden side members and reinforced with metal profiles. The legs have been stiffened with transversal tubes mounted with rubber washers and round head screws, while the top of the backrest is fitted with a drawn wire crosspiece. The ability to meld both design and functionality as seen i
Try LotSearch and its premium features for 7 days - without any costs!
Be notified automatically about new items in upcoming auctions.
Create an alert
.jpg "Source: Christie's")
.jpg "Source: Christie's")
