Beschreibung:

FORD PROBE IV CONCEPT 1983 Metallic silver with light grey velour interior Probe IV was in fact the third example of the Probe series. Probe II never appeared and Probe III was a concept created for Ford Europe which saw some of its features incorporated in the Merkur XR4Ti. Probe IV advanced the state of aerodynamic art at Ford to a new level, going to great lengths to make its surfaces as smooth as possible and present the minimum frontal area. A low ride height minimized undercar airflow and the Probe IV went to the extent of creating a speed sensitive ride height and attitude system. Probe IV could assume a pronounced nose-down attitude at speed. In fact, the back of Probe IV could rise six inches while at the same time the nose dropped four inches at high speed, improving its stability and air penetration. The front air dam was also electrically controlled, compensating for attitude changes and driver controllable to compensate for rough surfaces. Headlights were under plastic covers. Side windows were flush in their frames with small power operated panels at the bottom for ventilation and paying tolls. The radiator and air conditioning compressor were located at the rear in order to eliminate a high drag radiator opening in the front (or nose). A full belly pan smoothed the limited undercar airflow that the air dam and attitude control let through and the tires were specially-developed for Probe IV, skinny P155/75R-16 LDC Goodyear tires that even had a low drag tread pattern. Even the identification and emblems were flush with the Probe IV surface. The only interruption to exterior air flow were the outside mirrors, which were in faired-in and sharply swept back enclosures. Mechanical innovations were required to meet Probe IV requirements including a highly sophisticated short MacPherson strut front suspension. Its front engine, rear drive chassis was powered by a 1.6 liter 4-cylinder turbocharged engine which was canted 70 degrees to the side to lower the hood. One of Probe IV's most distinctive features are its fully-skirted wheels and tires which utilize membranes between the outer covers and the body. The membranes flex when the front wheels are turned and allow Probe IV to be driven normally, but drastically reduce wheel well turbulence and resulting aero drag. The occupants of Probe IV sit in specially designed grey velour "sling" style seats designed to provide lumbar and thigh support in a semi-reclining position which saves 1½ inches in roof height. Instruments are placed directly in front of the driver with other controls in elaborate black panels with white legends on each side of the wheel. The top of the single-spoke steering wheel is transparent. The transmission shifter and additional controls are placed on the center console. Probe IV achieved a drag coefficient of 0.152, the same as the F-16 fighter, an extraordinary accomplishment particularly in view of its comfortable internal accommodations for four. Two examples of the Probe IV concepts are offered here. FORD PROBE IV (1) 1983 Probe IV (1) was built on a working chassis. Its engine is no longer functional. The adjustable ride height system is air-energized and is believed to work for demonstration purposes but leaks. The windows are glass. Probe IV (1) has its external wheel skirts although the unique sealing membranes have deteriorated. All four doors work. The 2-piece alloy disc-style wheels have their experimental Goodyear low resistance tires. Bodywork is fiberglass. Overall condition of Probe IV (1) is poor. The paint is aged, scratched and chipped. There is a crack on the left front fender. The interior is worn and tired but complete. It is, however, a remarkable accomplishment which achieved both its goals: demonstrating that an automobile concept with comfortable and conventional accommodations for four adults could equal the drag coefficient of a frontline fighter aircraft; and continuing Ford's design evolution incorporating advanced