Beschreibung:

Jean Prouvé Rare demountable chair, model no. CB 22 circa 1948 Oak, oak-veneered moulded plywood, tubular aluminium, brass. 80.3 x 40.4 x 46.8 cm (31 5/8 x 15 7/8 x 18 3/8 in.) Manufactured by Les Ateliers Jean Prouvé France.
Provenance Mr Pujos, France Exhibited 'A Passion for Jean Prouvé From Furniture to Architecture: The Laurence and Patrick Seguin Collection', Pinacoteca Giovanni e Marella Agnelli, Turin, 6 April-8 September, 2013 'Calder │ Prouvé', Gagosian Gallery and Galerie Patrick Seguin, Gagosian Le Bourget, Paris, 8 June-2 November, 2013, and Galerie Patrick Seguin, Paris, 24 October-7 December, 2013 Literature Peter Sulzer Jean Prouvé Œuvre Complète, Volume 3: 1944–1954, Basel, 2005, pp. 154-55 including technical drawings Galerie Patrick Seguin and Sonnabend Gallery, Jean Prouvé Volume 1, Paris, 2007, pp. 234, 254–59 Pinacoteca Giovanni e Marella Agnelli and Galerie Patrick Seguin, A Passion for Jean Prouvé From Furniture to Architecture: The Laurence and Patrick Seguin Collection, exh. cat., Paris, 2013, illustrated pp. 42, 68-69, 270-71 Gagosian Gallery and Galerie Patrick Seguin, Calder │ Prouvé, exh. cat., New York, 2013, illustrated pp. 86-87 Catalogue Essay In 1947, Les Ateliers Jean Prouvé revisited their wartime research into the construction of new wood or metal knockdown chair. Because of a continuing shortage of metal or, perhaps, the rapid expansion of the private home market, the initial emphasis was on a wooden model that gradually replaced the ‘tout bois’ chair. The arrival of a 'do-it-yourself chair' was announced by Jean Prouvé during the Meubles de France competition in 1947. The CB 22 demountable wooden chair comprises two solid wood lateral bases held together by two braces—threaded shanks inside metal tubes—bolted on the outside. One early version was quite complicated to assemble, especially in respect of the mortise and tenon attachment of the moulded plywood back and seat to the frame. The definitive model was simpler, and stresses the knockdown character of the chair with metal washers at the assembly points. The front washers were in some cases extended along the leg by a plate. The back and seat were initially fixed to the frame with screws, then with tapped studs. The tubes protecting the braces are of steel or aluminum. The CB 22 chair, then the chair No 301, symbolically shown disassembled on the cover of the Ateliers Jean Prouvé furniture catalogue in 1951, was manufactured until 1953. Read More Artist Bio Jean Prouvé French • 1901 - 1984 Jean Prouvé believed in design as a vehicle for improvement. His manufactory Les Ateliers Jean Prouvé located in Nancy, France, produced furniture for schools, factories and municipal projects, both within France and in locations as far flung as the Congo. Though he designed for the masses, pieces such as his "Potence" lamps and "Standard" chairs are among the most iconic fixtures in sophisticated, high-design interiors today. Collectors connect with his utilitarian, austere designs that strip materials down to the bare minimum without compromising on proportion or style. Prouvé grew up in Nancy, France, the son of Victor Prouvé, an artist and co-founder of the École de Nancy, and Marie Duhamel, a pianist. He apprenticed to master blacksmiths in Paris and opened a small wrought iron forge in Nancy. However it was sheet steel that ultimately captured Prouvé's imagination, and he ingeniously adapted it to furniture, lighting and even pre-fabricated houses, often collaborating with other design luminaries of the period, such as Robert Mallet-Stevens Le Corbusier and Charlotte Perriand View More Works